Solve your stopped sewers issues
Solve your stopped sewers issues
You might notice the clogged up drainage when you are in shower and suddenly the water level starts rising up. A plugged drainpipe is in action. Or you’re in front of the toilet sink, brushing your teeth and before you know it – the sink is halfway full. Everyone hates clogged up drains because they not only create problems but are also unhygienic and can create a mess. However it is something that every household has to deal with, sooner or later. The most preferred approach is to prepare ahead of time for such a predicament by educating oneself on how to fix bathroom drainage when the drain pipes become stopped.
Why Do They Happen?.
Blocked drainage can result from trapped solid objects such as hair, dust and particles between your bathroom drain and the attached pipes. The problem aggravates when bathroom products like soap, shampoo, conditioner, detergent, and the like begin to accumulate on the mass. When the offending mass becomes too dense to allow any water to flow through freely, the problem is identified as a clogged drain. When waste water drainage very slowly or just stands stubbornly in the washbasin, you know you have a stopped drainpipe problem.
How to remove the drainpipe blockage.
Time to roll up your sleeves and tackle the clog – here are a few tips on what you can do to unclog your bath or sink drainpipe. The first thing you will have to do is take out the plug of the blocked sink or drain. You can easily remove the stopper by pulling it off from the bathroom sink, however if it’s fixed under the sink then you need to unscrew the nuts. In case of your bathtub, the plug can be unscrewed at the mouth of the drainage or the overflow plate can be removed to expose the assembly.
Once you remove the plug, you may then be able to see the source of the clog. Those greasy lumps of entangled hair and residue can be seen sticking to the sides and corners of the drain pipe. Try to get hold of the mass and pull it out. If it is out of reach, you can use a wire clothes hanger to remove it if you can hook into the debris and pull it. As soon as the clog is removed, water will start running freely through the drain.
However, there is a chance that you will not be able to reach the blockage with the wire so you will have to try something else. A drain plunger can help you get rid of blockages that are too deep down to reach by inserting your hand. In the first step, use a wet cloth to cover the overflowing drain, and then use the plunger; this will make the suction stronger. Now, place the plunger straight away on the opening of the drain,and thump it up and down a number of times. You may find that this suction-push action of the plunger loosens the obstructed debris down the pipe and the collected water now drainage freely.
You can unblock the drains through chemical drain pipe cleaner too if a drains plunger does not work for you. The chemicals have the potential to harm your bathroom fixtures, and they are dangerous too; for this reason, they should be used only when all the above methods fail to unclog your drainpipe.
Call in the drainage Professionals.
If all the steps outlined above fail to clear the plugged drainpipe, then it is best to call in a crack team – a qualified and experienced plumber or drainage contractor from your area. Alternatively experienced drainage contractors like Dynorod have all the necessary equipment required to unclog the drains and inspect the interior with a CCTV inspection or drainage camera. Though it won’t come cheaply, an experienced plumber’s help can provide peace of mind.
